Condensadores de alto voltaje

Quote within 6 hours · radial-lead ceramic typically 3–4 weeks · fast screw-terminal ranges about 1 month.

HVC manufactures high voltage capacitors from 1 kV to 150 kV: radial-lead ceramic discs, screw-terminal doorknob capacitors, metallized polypropylene film and safety-certified AC parts. Ceramic components use N4700 Class I or Y5T Class II dielectric and are screened to partial discharge ≤ 5 pC at rated voltage.

Choosing a high voltage capacitor starts with three questions: what voltage stands across it in service, how much capacitance the circuit needs, and how much capacitance drift the design can tolerate. Everything else — package, mounting, dielectric, termination — follows from those three. This page maps the families HVC makes onto those questions, then links to the detailed specification pages.

The three families at a glance

FamilyVOLTIOSCapacidadEl dieléctricoMontaje
Radial-lead ceramic disc1 kV – 50 kV catalogue, 70 kV to drawing10 pF – 33,000 pFN4700, Y5T, Y5P, Y5U, Y5V, SLRadial leads, 5–20 mm spacing
pomo de puerta con terminal de tornillo10 kilovoltios – 150 kilovoltios100 pF – 30,000 pFN4700, Y5T, Y5VM4 / M5 / 8-32 UNC stud
Película de polipropileno metalizado.700 - 3000 Vcc0.0068 – 5.6 µFSelf-healing PP filmRadial, PCB mount
Safety certified AC250 - 760 Vac100 pF – 1 µFY5P, Y5U, Y5VX1/Y1, X2/Y2 radial

High voltage resistors and rectifier diodes for the same circuits are on separate pages: thick film resistors y diodos rectificadores.

Class I or Class II dielectric

This is the decision that most often goes wrong. Class I (N4700) holds its capacitance across temperature and voltage; Class II (Y5T, Y5P, Y5U, Y5V) packs more capacitance into the same body but drifts.

El dieléctricoClaseDrift over −30 to +85 °CDonde pertenece
N4700Clase IDefined negative coefficient, stableX-ray and CT tanks, laser PFN, snubbers, RF, HVDC valve positions
Y5Pclase II± 10%General HV filtering, coupling
Y5Tclase II+22% / −33%Cost-sensitive HV filtering and multipliers
Y5U / Y5Vclase II+22% / −56% to −82%Non-critical decoupling where size dominates

If the circuit is a snubber, a pulse-forming network, a resonator or a voltage divider, drift changes the circuit behaviour and Class I is the only safe choice. If it is bulk filtering where a ±30% shift does not matter, Class II gives you the capacitance in a smaller body. The Comparación entre N4700 y Y5T analiza los números.

Selección por solicitud

AplicaciónEspecificación típicaComience Aquí
Medical X-ray and CT high voltage tanks20–80 kV, N4700, PD ≤ 5 pC, oil immersedSoluciones de imágenes médicas
Pulsed laser and PFN discharge10–50 kV, high dV/dt, low ESLPulsed power solutions
HVDC and VSC converter valves10–150 kV screw terminal, grading and snubber dutyHVDC valve capacitors
NDT and inspection X-ray30–100 kV, low ripple, stable capacitancePrecision inspection solutions
IGBT snubber and DC link700–3000 Vdc, self-healing filmCondensadores de película
AC line filtering and safetyX1/Y1, X2/Y2 rated to IEC 60384-14Condensadores de seguridad

Every voltage class, specified

Each rating below has its own specification page with the full part-number table, capacitance range, dielectric options, stud or lead dimensions. Use it to pick the exact value rather than browsing the catalogue.

VOLTIOSRadial-lead ceramic discpomo de puerta con terminal de tornillo
1 kilovoltios – 8 kilovoltios1 kV–8 kV disc specification-
10 kV10 kV disc specification-
15 kV15 kV disc specification-
20 kV20 kV disc specification20 kV doorknob specification
30 kV30 kV disc specification30 kV doorknob specification
40 kV40 kV disc specification40 kV doorknob specification
50 kV50 kV disc specification50 kV doorknob specification
70 kilovoltios – 100 kilovoltiosDisc range to 50 kV; higher ratings built to drawing70–100 kV doorknob specification
150 kV-Screw-terminal, 800 pF, built to drawing — full doorknob range

Lead time by product family

FamilyHorario típicoWhat confirms the date
Radial-lead ceramic discsGeneralmente de 3 a 4 semanasVoltage, capacitance, dielectric, lead spacing, quantity and destination
Screw-terminal doorknob capacitorsFast catalogue ranges can be about 1 monthVoltage, capacitance, disc construction, stud, quantity and delivery location
Film and safety-certified AC capacitorsConfirmed by the selected seriesPart number, certification requirement, quantity and destination

These are normal planning ranges, not a promise of immediate stock. Custom voltage, capacitance, stud, insulation, coating, drawing or qualification requirements require a separate date confirmation after RFQ.

What the datasheet has to state

Four figures decide whether a high voltage capacitor survives. Ask for all four on any quotation, from any supplier:

Replacing a discontinued high voltage capacitor

Most of the high voltage capacitors in service today were designed in when a catalogue part existed. When Murata, TDK or Vishay ends a series, the board does not change — the capacitor has to fit the same footprint and mounting. HVC builds to the original drawing and publishes a cross-reference table with the offer. Send the original part number, the drawing or the datasheet page; the capacitor cross-reference index covers the Murata, TDK, Vishay and AVX programs already mapped.

Preguntas frecuentes

What is the highest voltage available?

150 kV DC in screw-terminal ceramic. Above that, series stacks are built to drawing; the mechanical envelope becomes the limiting factor rather than the ceramic.

How much should I derate a high voltage capacitor?

For continuous DC duty, 50% to 70% of rated voltage is the working range most designs use. For repetitive pulse duty the limit is dV/dt and self-heating, not the DC rating — ask for the pulse data on the specific part.

Ceramic or film for a high voltage application?

Ceramic wins above roughly 10 kV and wherever the package must be small or the part must survive high temperature. Film wins where self-healing matters, where microfarads are needed, or where the pulse energy is large at a few kilovolts.

Do you supply single units and small lots?

Yes. Prototype and laboratory quantities are quoted the same way as production orders, with the partial-discharge record per unit.

¿Cuál es el tiempo de entrega?

Standard ceramic ranges ship in 4 to 6 weeks; rectifier stacks and catalogue screw-terminal parts in 2 weeks. Quotations are returned within 6 hours.

Specifying a high voltage capacitor?

Send the working voltage, capacitance, dielectric class, package envelope and annual quantity. HVC replies with a matched part number, partial-discharge data and a 6-hour quotation.

Solicitar presupuesto técnico →