calculadora de ingeniería

Series Capacitor and Balancing Resistor Calculator

HV inC1C2Rb1Rb2VxV1V20 V

Cómo leer el diagrama. Two capacitors in series across the DC bus, each with a balancing resistor across it. Leakage, not capacitance, sets the steady-state division; the resistors swamp the leakage difference and hold the midpoint at Vx.

Two capacitors in series do not share voltage by capacitance alone; under steady DC, leakage decides it. This calculator gives total capacitance, the capacitive split and the balancing resistor that dominates leakage spread.

Ingresos

Resultados

Series capacitance
-
Voltage across C1
-
Voltage across C2
-
Balancing resistor per unit
-
Dissipation per resistor
-

La fórmula

1/C = 1/C1 + 1/C2. For AC or fast transients the voltage divides inversely with capacitance: V1 = V × C2 / (C1 + C2). For steady DC the split follows leakage current, so equal capacitors with unequal leakage can drift far apart; a resistor across each unit forces the split to follow the resistor ratio.

Lo que la calculadora no incluye

Eligiendo las partes

The balancing resistor is a high-value thick film part: plano to 35 kV per body, or a barra de potencia por encima de eso.

Envíe los valores calculados y el arancel: Solicitar presupuesto técnico, respuesta en 6 horas.